📡Amateur Radio Digital CommunicationsBAND: 20 Meters Amateur RadioITU: HF (High Frequency)
14.074 MHz FT8 20-Meter Band (Worldwide Ham Radio Digital Calling)
Exact: 14,074 kHz (14.074 MHz)Demodulation: USBService: Global Amateur Service
14.074 MHz USB is universally acknowledged as the center of gravity of worldwide amateur radio. Using Joe Taylor’s (K1JT) Nobel-prize winning WSJT-X FT8 protocol, stations decode weak signals 20 dB below the noise floor.
No internet stream for this one. Listen to it live through a real shortwave receiver.Listen on a real receiver
Technical Radio Frequency Profile
- Modulation Standard
- Upper Sideband (USB) with 8-FSK tone audio modulation
- Channel Grid / Bandwidth
- 50 Hz channel bandwidth / 3 kHz total passband slot
- Transmitter Power (Typical)
- QRP 5W up to 100W amateur transceivers
- Polarization
- Horizontal Yagi / Multi-band Dipole
- Signal Propagation Mode
- Ionospheric F2 Layer Skip
- Typical Broadcast Range
- Global antipodal propagation (up to 20,000 km)
Operational Protocol & Use Case
Used by licensed amateur operators in every country to log intercontinental contacts, verify antennas, track real-time solar propagation, and achieve DX awards (DXCC).
Listening & SDR Tuning Tips
- FT8 transmissions operate in strict synchronized 15-second cycles: 12.64-second tone burst followed by a brief RX pause.
- Sound like a chorus of robotic melodic flutes chirping simultaneously in the 300–2500 Hz audio spectrum.
Frequently Asked Questions about 14.074 MHz
What does FT8 stand for?
FT8 stands for Franke-Taylor 8-FSK, named after its co-developers Steven Franke (K9AN) and Joe Taylor (K1JT).
Can FT8 signals be decoded in real-time?
Yes! By feeding audio from our SDR receiver directly into software like WSJT-X or JTDX, callsigns and signal reports from all continents decode instantly.